Operation Manual

8
MDC 1200 SYSTEM OPERATION
8-10
Transmitting a call (Continued)
D Transmitting an MDC Stun call
An MDC Stun call remotely disables the transceiver.
<Key operation>
1. Push [Call Menu] to display the Call Menu screen.
2. Push [Up] or [Down] to select a station ID, then
push [OK].
3. Push [Up] or [Down] to select “Stun.”
4. Push [PTT] to transmit an MDC Stun call.
• After receiving an acknowledgement, “Success” is
displayed.
• When the transceiver does not receive an
acknowledgement, “Failed” is displayed.
• After transmitting the Stun call, returns to the Standby
screen.
Previous view