Operation Manual

WARNING

Your Icom radio generates RF electromagnetic energy

during transmit mode. This radio is designed for and

classiﬁed as “Occupational Use Only”, meaning it must

be used only during the course of employment by indi-

viduals aware of the hazards, and the ways to minimize

such hazards. This radio is NOT intended for use by the

“General Population” in an uncontrolled environment.

This radio has been tested and complies with the FCC and IC RF ex-

posure limits for “Occupational Use Only”. In addition, your Icom radio

complies with the following Standards and Guidelines with regard to RF

energy and electromagnetic energy levels and evaluation of such levels

for exposure to humans:

• FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluat-

ing Compliance with FCC Guidelines for Human Exposure

to Radio Frequency Electromagnetic Fields.

• American National Standards Institute (C95.1-1992), IEEE

Standard for Safety Levels with Respect to Human Exposure

to Radio Frequency Electromagnetic Fields, 3 kHz to 300

GHz.

• American National Standards Institute (C95.3-1992), IEEE

Recommended Practice for the Measurement of Potentially

Hazardous Electromagnetic Fields– RF and Microwave.

• The accessories (antennas, batteries, belt clips, speaker-

microphone, etc. that is listed on pages 33–35) are autho-

rized for use with this product. Use of accessories other than

those speciﬁed may result in RF exposure levels exceeding

the FCC and IC requirements for wireless RF exposure.

CAUTION

To ensure that your expose to RF electromagnetic

energy is within the FCC and IC allowable limits for

occupational use, always adhere to the following

guidelines:

SAFETY TRAINING INFORMATION