Operation Manual

Setting the Beep level ■
The beep function can be turned ON or OFF, and its level can be
adjusted between 1 and 5, or 1 (linked) and 5 (linked). When a
Linked option is selected, the beep level is adjusted with [VOL].
Rotate [VOL] to turn the trans- q
ceiver power OFF.
Set [ROTARY SELECTOR] to w
any channel other than Chan-
nel 16.
While holding down [Lower], ro- e
tate [VOL] to turn ON the power
and enter the beep level adjust-
ment mode.
Push [Upper] to change the beep r
level, or push [Lower] to turn the
beep function ON or OFF.
• The adjustable range is 1 to 5 or
1 (Linked) to 5 (Linked).
• A beep sounds after pushing
[Upper]. Therefore, you can de-
termine the current level setting
by the type of beep that sounds.
• One beep sounds when the beep
function is turned ON after push-
ing [Lower].
Rotate [VOL] to turn the power t
OFF, then ON again to exit the
beep level adjustment mode.
NOTE: This operation may not
be available, depending on the
presetting. Ask your dealer for
details.
18
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
[Upper]
[VOL]
[ROTARY
SELECTOR]
[Lower]
2
5
4
3
1
5 (Linked)
4 (Linked)
3 (Linked)
2 (Linked)
1 (Linked)
[Upper]
operation:
[Lower]
operation:
Turn the beep
function
ON or OFF.