Operation Manual

Setting the squelch level ■

The squelch circuit mutes the received audio signal, depending on

the signal strength.

Rotate [VOL] to turn the trans- q

ceiver power OFF.

Set [ROTARY SELECTOR] to w

any channel other than Chan-

nel 16.

While holding down [Upper], ro- e

tate [VOL] to turn ON the power

and enter the squelch level ad-

justment mode.

Push [Upper] to increase the r

squelch level (tight squelch), or

push [Lower] to decrease the

squelch level (loose squelch).

• The adjustable range is 0 (loose

squelch) to 9 (tight squelch).

• A beep sounds after pushing

[Upper] or [Lower].

An error beep sounds if you try

to decrease less than 0 or try to increase more than 9.

Therefore, you can determine the current level setting by the type

of beep that sounds.

Rotate [VOL] to turn the power OFF, then ON again to exit the t

squelch level adjustment mode.

NOTE: This operation may not be available, depending on the

presetting. Ask your dealer for details.

BASIC OPERATION

[Upper]

[VOL]

[ROTARY SELECTOR]

[Lower]