Operation Manual

27
4
BIIS OPERATION
4
■ BIIS indication
The following indications are available for the BIIS operation
on a BIIS channel.
CCOONNNNEECCTT
: Individual/group call is successful.
OOKK
: Message (status or SDM) transmission is suc-
cessful.
FFAAIILLEEDD
: No answer back is received.
WWAAIITT
: Appears during retry of the call (2nd call).
CCLLRR DDOOWWNN
: End the communication.
BBUUSSYY
: Operating channel is in the busy condition.
■ Priority A channel selection
When one of the following operations is performed, the trans-
ceiver selects the Priority A channel automatically.
Priority A is selected when;
•Clear down signal is received/transmitted
-Set the ‘Move to PrioA CH’ item as ‘Clear down.’
•Turning the power ON
The Priority A channel is selected each time the transceiv-
er power is turned ON.
•Status call
The Priority A channel is selected when transmitting a sta-
tus call.
-Enable the ‘Send Status on PrioA CH’ item in the BIIS
configuration.