Operation Manual

24
4
BIIS OPERATION
DD
General
The short data message, SDM, can be sent to an individual
station or group stations. Also, 8 SDM memory channels are
available and the messages can be edited via PC program-
ming.
DD
Transmitting an SDM
q While in the standby condition, push [Digital Button], then
push [CH Up] or [CH Down] or rotate [ROTARY SELEC-
TOR] to select the desired station/group code.
w Push [Digital Button] again, then push [CH Up] or [CH
Down] to select the desired SDM.
Or, you can select the desired SDM using [Status Up]/
[Status Down] key directly.
e Push [Call] or [PTT]* to transmit the SDM to the selected
station/group.
*PTT call can be made only when PTT call capability is permitted.
•2 beeps will sound and the transceiver returns to the standby
condition automatically when the transmission is successful.
DD
Programming an SDM memory
(IC-F3062T/IC-F4062T (10-key type) only)
q During standby condition, push [Digital Button] twice, then
push [CH Up] or [CH Down] to select the desired SDM to
be edited.
w Push [M] or [#] to enter the message editing condition.
•The first character blinks when [#] is pushed, the last character
blinks when [M] is pushed.
e Push the appropriate digit key, [0] to [9], to enter the
desired character.
•See the table at right for the available characters.
•Pushing [CH Up] also enters space, pushing [CH Down] deletes
the selected character.
r Push [#] to move the cursor to the right, push [M] to move
the cursor to the left.
t Repeat steps e and r to set the desired text message.
y Push and hold [Digital Button] for 1 sec. to overwrite the
set content into the memory.
•Push [Digital Button] momentarily to cancel the editing and return
to the original message indication.
TXCETXCECALLCALL TXC BIFNBIFN
MESSAGE 1
How are you?
Blinks
When [#] is pushed.
SDM is displayed.
TXCETXCECALLCALL TXC BIFNBIFN
MESSAGE 1
How are you?
■ Transmitting an SDM (Short Data Message)