Operation Manual

DD
Group call
q When a group call is received;
•Beeps sound.
•“ ” appears and the mute is released.
•The programmed text message (e.g.“
GGRROOUUPP
”) and the calling sta-
tion ID (or text) is displayed when the indication mode is 2 lines.
•The programmed text message (e.g.“
GGRROOUUPP
”) and the calling
station ID (or text) is displayed alternately when the indication
mode is 1 line, depending on the setting.
•“ ” appears or blinks depending on the setting.
w Push and hold [PTT], then speak into the microphone at a
normal voice level.
•TX indicator lights red.
NOTE: Only one station is permitted to speak.
e Release [PTT] to return to receive.
•BUSY indicator lights green while receiving a signal.
r To finish the conversation, push [Moni(Audi)] to send the
‘Clear down’ signal.
•Either station can send a ‘Clear down’ signal.
•“
CCLLRR DDOOWWNN
” is displayed for 2 sec. (approx.)
•“ ” disappears and the transceiver returns to the standby con-
dition.
DD
Displaying the received call record
— Queue indication
The transceiver memorizes the calling station ID in the mem-
ory. Up to 3 calls can be memorized, and the oldest call
record is erased when a 4th call is received. However, once
the transceiver is powered OFF, the all records are cleared.
q Push and hold [Digital Button] for 1 sec.
•Displays following indication.
When a record is available
When no record is available
w Push [CH Up] or [CH Down] to select the desired call.
e Push and hold [Digital Button] for 1 sec. again to return to
the standby condition.
•When no operation is performed for 30 sec., the transceiver
returns to the standby condition automatically.
< QUEUE >
NO QUEUE
TXCETXCECALLCALL TXC BIFNBIFN
< QUEUE >
–QUEUE!–
TXCETXCECALLCALL TXC BIFNBIFN
GROUP
1120
TXCETXCECALLCALL BIFNBIFN TXC
Appears Appears or
blinks
18
4
BIIS OPERATION