Operation Manual

10
2
PANEL DESCRIPTION
ID-MR SELECT KEY “
IIDDMMSS
”
(PMR or BIIS PMR operation only)
➥ Recalls detected ID codes.
•Push this key, then select the ID code using [CH Up]/[CH Down].
•Up to 5 ID’s are memorized.
➥ Push and hold to erase the selected ID’s.
SCRAMBLER FUNCTION “
SSCCRR
”
Push to toggle the voice scrambler function ON and OFF.
COMPANDER KEY “
CCOOMMPP
”
Push to toggle the compander function ON and OFF.
The compander function reduces noise components from the
transmitting audio to provide clear communication.
USER SET MODE KEY “
SSEETT
”
➥ Push and hold to enter user set mode.
• During user set mode, push this key to select an item, and
change the value or condition using push [CH Up]/[CH Down].
➥ Push and hold this key again to exit user set mode.
User set mode is also available via the ‘Power ON function.’
Refer to ((☞ p. 16)) also.
OPT OUT KEYS “
OOPP11
” “
OOPP22
” “
OOPP33
”
Push to control the output signal level of the optional ports in
the optional unit connector.
OPT MOMENTARY KEYS “
OO11MM
” “
OO22MM
” “
OO33MM
”
Push and hold to control the output signal level of the option-
al ports in the optional unit connector.
DIGITAL BUTTON KEY “
BBIIFFNN
”
(BIIS operation only)
➥ Push to select the call ID list, transmit message and stand-
by condition. Toggles between queue channel and
received message record indication after queue channel is
selected.
➥ Push and hold to select queue channel indication.
STATUS UP/DOWN KEYS “
BBIIUUPP
” “
BBIIDDNN
”
(BIIS operation only)
➥ While in the standby condition, push to display the trans-
mit status indication and select a status number.
➥ When a received SDM is displayed, push to cancel the
automatic scroll and scroll the message manually.
➥ When an SDM that contains more than 12 characters is
displayed, push to scroll the message manually.