Instruction Manual

PROGRAMMABLE FUNCTIONS

DTMF TRANSMISSION

This function allows you to send a pre-programmed DTMF code to

control a repeater, open another transceiver’s squelch, etc.

Manual transmission:

Push desired digit keys in sequence while pushing [PTT].

• Pushing [PTT] may not be necessary depending on programming.

Automatic pre-programmed transmission:

Push the [DTMF Autodial] switch to send a DTMF code.

EMERGENCY FUNCTION

The emergency function allows you to send your ID quickly and

easily to your Base Station, etc. in case of emergency.

Push and hold the [EMERGENCY SINGLE/REPEAT] switch for 1

sec. to activate the emergency function.

• The transceiver selects a pre-programmed channel, then sends

an emergency signal to your Base Station.

• The pre-programmed channel remains selected until a control sig-

nal is received from the Base Station, or power is turned OFF.

• The emergency call is repeatedly transmitted at pre-programmed

intervals.

MR-CH1–4

Tush to ..