Instruction Manual

PROGRAMMABLE FUNCTIONS

MONITOR AUDIBLE FUNCTION

The monitor function allows you to open the transceiver’s squelch

manually to check whether a channel is busy or not. The trans-

ceiver has 2 conditions for receive standby:

Audible condition:

This condition mutes audio ONLY when

no carrier is present. You can receive (or

monitor) any signals on a channel.

• Push and hold the [MONI/AUDI], switch

to select the audible condition.

Any audio mute functions are cancelled

while pushing the [MONI/AUDI] switch.

Inaudible condition:

This condition mutes ALL signals except

those directed to you. Therefore you

should check a channel’s condition (busy

or not) with the monitor function before

transmitting.

• Push the [MONI/AUDI] switch momen-

tarily to select the inaudible condition.

TALK AROUND

The talk around function changes duplex channels to simplex chan-

nels.

• Duplex allows you to contact your base station, repeaters, etc.

• Simplex allows you to contact other portable transceivers directly

(portable-to-portable contact).

Push the [TALK AROUND] switch one or more times to toggle the

function ON and OFF.

All signals are

received

789

P1 P2 P3

Only signals

containing

the proper

tone are

received

789

P1 P2 P3