User Guide

63
11
OTHER FUNCTIONS
The function display may occasionally display erroneous in-
formation (e.g. when first applying power). This may be
caused externally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.
•Partial resetting is also available. See next page for details.
IMPORTANT!:
Resetting the transceiver CLEARS all memory information
and initializes all values in the transceiver, including TV
channel skip setting.
➥ While pushing and holding [FUNC], [V/M] (
SKIP
• S . MW ) and
[SQL] (
ATT • SET ), turn the power ON to reset the CPU.
SCAN
S.MW
SET
ATT
DTCS
TSQL
WFMAM
-
DUP
LOW
VOL PRIO P SKIP
MR
5
1
9
ATT
DTCS
TSQL
WFMAM
-
DUP
LOW
VOL PRIO P S K IP
MR
5
1
9
SET
S.MW
*The displayed frequency differs
according to tranceiver version.
■ All reset
AT POWER ON