Operation Manual

5-4

Mini scope screen indication

The mini scope screen can be displayed with another

screen display, such as set mode menu, decoder

screen, memory list screen, etc. simultaneously.

q Set the scope mode (center or fix), marker, attenu-

ator, span, etc. in advance. (pgs. 5-2, 5-3)

w Push [M.SCOPE] to toggle the mini scope indica-

tion ON and OFF.

• The S/RF meter type during mini scope indication can

be selected in display set mode (Meter Type (Wide

Screen) item). (p. 12-11)

Scope set mode

This set mode is used to set the waveform color,

sweeping speed, scope range for fix mode, etc.

q During spectrum scope display ON, push

[F-7•SET] to select scope set mode screen.

• Push [F-7•WIDE] to toggle the screen size between nor-

mal and wide.

w Push [F-1•Y] or [F-2•Z] to select the desired set

item.

e Set the desired condition using the main dial.

• Push [F-4•DEF] for 1 sec. to select the default condition

or value.

• Push [F-3•Ω≈] to select the set contents for some

items.

r Push [EXIT/SET] to exit from set mode.

[F-1•Y] Main dial[EXIT/SET][F-2•Z][F-4•DEF]

[F-3•Ω ≈] [F-7•WIDE]

[M.SCOPE]

FUNCTIONS FOR RECEIVE

Turn the transmitting signal waveform indication ON

and OFF.

NOTE: The transmitting signal waveform indica-

tion is available for the center mode only.