Operation Manual

4-26
DD
PSK decode set mode
This set mode is used to set the decode USOS func-
tion, time stamp setting, etc.
Setting contents
q During PSK mode operation, push [F-3DECODE]
to select PSK decode screen.
w Push [F-1<MENU2>] to select PSK decode menu
2, then push [F-6SET] to select PSK decode set
mode.
Push [F-7WIDE] to toggle the screen size from normal
and wide.
e Push [F-1Y] or [F-2Z] to select the desired set
item.
r Set the desired condition using the main dial.
Push [F-4DEF] for 1 sec. to select a default condition
or value.
Push [F-3Ω≈] to select the set contents for some
items.
t Push [EXIT/SET] to exit from set mode.
[F-1Y] Main dial[EXIT/SET][F-2Z][F-4DEF]
[F-3Ω ≈] [F-7WIDE]
4
RECEIVE AND TRANSMIT
Turn the time stamp (date, transmission or reception
time) display ON and OFF.
ON : Displays the time stamp.
OFF : No time stamp display.
Selects the clock display for time stamp usage.
NOTE: The time wont be displayed when OFF is
selected in PSK Time Stamp as above.
Local : Selects the time that set in Time (Now).
UTC* : Selects the time that set in CLOCK2.
*The name of choice may differ according to
CLOCK2 Name setting (p, 11-2). UTC is the
default name of CLOCK2.
Set the FFT scope waveform averaging function from
2 to 4 and OFF. (default: OFF)
Recommendation!
If you use the FFT scope waveform for tuning, using
the default or smaller number setting is recom-
mended.
Set the color for the FFT scope waveform.
The color is set in RGB format.
The set color is indicated in the box beside the RGB scale.
Push [F-3Ω≈] to select R (Red), G (Green) and B (Blue),
and then rotate the main dial to set the ratio from 0 to 255.
Select the AFC (Automatic Frequency Control) func-
tion operating range from ±15 Hz (default) and ±8 Hz.
NOTE: The AFC function may not tune the signal
properly when a weak PSK signal is received.