Operation Manual

4-17
DD
Editing RTTY memory
The contents of the RTTY memories can be set using
the memory edit menu. The memory can store and re-
transmit 8 RTTY message for often-used RTTY infor-
mation. Total capacity of the memory is 70 characters
per memory channel.
Programming contents
q During RTTY mode operation, push [F-3DECODE]
to select RTTY decode screen.
w Push [F-4TX MEM] to select RTTY memory
screen, then push [F-6EDIT] to select RTTY mem-
ory edit screen.
RTTY memory contents of the Channel 1 (RT1) is se-
lected.
e Push [F-7RT1..RT8] to several times to select the
desired RTTY memory channel to be edited.
r Push [F-5Ω≈] to select the edit item between
memory contents and memory name.
t Push [ABC], [abc], [123] or [Symbol] to select the
character group, then rotate the main dial to select
the character, or push the keypad for number input.
[abc] appears when [ABC] is pushed when ABC char-
acter group is selected, and [Symbol] appears when
[123] is pushed when 123 character group is selected.
Selectable characters (with the main dial);
For your convenience
When a PC keyboard is connected to [KEYBOARD]
connector on the rear panel, the RTTY memory
contents can also be edited from the keyboard.
y Push [F-1] or [F-2] to move the cursor back-
wards or forwards, respectively.
Pushing [F-3DEL] deletes a character and [F-4SPACE]
inserts a space.
u Repeat steps t and y to input the desired charac-
ters.
i Push [EXIT/SET] to set the contents and exit RTTY
memory edit screen.
[F-1]
[ABC]/[abc][123]/[Symbol]
[F-7RT1..RT8][EXIT/SET][F-2]
[F-3DEL] [F-4SPACE]
[F-5Ω≈]
4
RECEIVE AND TRANSMIT
RTTY memory edit screen
Key selection Editable characters
A to Z (capital letters)
a to z (small letters)
(selectable for memory name only)
0 to 9 (numbers)
! # $ % & ¥ ? ` ^ + / . , : ; =
< > ( ) [ ] { } | _
~
@
(For the memory contents set-
ting, ! $ & ? / . , : ; ( ) are
selectable.)
CH Name Contents
RT1 MYCALLx2 DE ICOM ICOM K
RT2 MYCALLx3 DE ICOM ICOM ICOM K
RT3 QSLUR599 QSL UR 599599 BK
RT4 DE+UR599 QSL DE ICOM ICOM UR 599599
BK
RT5 73 GL SK 73 GL SK
RT6 CQ CQ CQ CQ CQ CQ DE ICOM ICOM ICOM
K
RT7 RIG&ANT MY TRANSCEIVER IS IC7800 &
ANTENNA IS A 3ELEMENT
TRIBAND YAGI.
RT8 EQUIP. MY RTTY EQUIPMENT IS
INTERNAL FSK UNIT &
DEMODULATOR OF THE
IC7800.
Pre-programmed contents