Operation Manual

4-16
DD
RTTY memory transmission
Pre-set characters can be sent using the RTTY mem-
ory. Contents of the memory are set using the edit
menu.
q During RTTY mode operation, push [F-3DECODE]
to select RTTY decode screen.
w Push [F-4TX MEM] to select RTTY memory
screen.
e Push [F-714/58] to select memory bank then
push one of the function keys ([F-1RT1] to
[F-4RT4] or [F-1RT5] to [F-4RT8]).
When no keyboard is connected, the selected memory
contents will be transmitted immediately.
When a keyboard is connected, the memory contents
will be transmitted immediately when function key is
pushed, or transmitted after [F12] on the connected key-
board is pressed, depending on auto transmission/re-
ception setting (see below).
The transmission date, time, reception date and/or time
may be displayed in RX contents screen, depending on
setting.
DD
Automatic transmission/reception setting
q During RTTY mode operation, push [F-3DECODE]
to select RTTY decode screen.
w Push [F-4TX MEM] to select RTTY memory
screen, then push [F-6EDIT] to select RTTY mem-
ory edit screen.
RTTY m
emory contents of the Channel 1 (RT1) is se-
lected.
e Push [F-7RT1..RT8] several times to select the de-
sired RTTY memory.
r Push [F-6AUTO TX] several times to select the de-
sired condition as follow.
AUTO TX/RX : Automatically transmits the se-
lected memory and returns to re-
ceive after the transmission.
AUTO TX : Automatically transmits the se-
lected memory. To return to re-
ceive, press [F12] on the key-
board.
AUTO RX : Press [F12] on the keyboard to
transmit the selected memory. Au-
tomatically returns to receive after
the transmission.
No indication : Press [F12] on the keyboard to
transmit the selected memory and
press [F12] again to return to re-
ceive.
t Push [EXIT/SET] to exit RTTY memory edit condi-
tion.
NOTE: The transceiver always functions as the
AUTO TX/RX setting when no keyboard is con-
nected.
[F-6AUTO TX] [F-7RT1..RT8][EXIT/SET]
[F-714/58][F-1RT1][F-4RT4]
[F-1RT5][F-4RT8]
[EXIT/SET]
4
RECEIVE AND TRANSMIT