Operation Manual

4-10

Contest number set mode

This menu is used to set the contest (serial) number

and count up trigger, etc.

• Setting contents

q During CW mode operation, push [F-3•KEYER] to

select memory keyer screen.

w Push [EXIT•SET] to select memory keyer menu,

then push [F-3•001] to select contest serial number

set mode.

e Push [F-1•Y] or [F-2•Z] to select the desired set

item.

r Set the desired condition using the main dial.

• Push [F-4•DEF] for 1 sec. to select the default condition

or value.

• Contest number set mode screen t Push [EXIT/SET] twice to normal screen.

[F-1•Y] Main dial[EXIT/SET][F-2•Z][F-4•DEF]

RECEIVE AND TRANSMIT

This item sets the numbering system used for contest

(serial) numbers— normal or short morse numbers.

• Normal : Does not use short morse numbers

(default)

• 190➔ANO : Sets 1 as A, 9 as N and 0 as O.

• 190➔ANT : Sets 1 as A, 9 as N and 0 as T.

• 90➔ NO : Sets 9 as N and 0 as O.

• 90➔ NT : Sets 9 as N and 0 as T.

This selects which of the four memories will contain

the contest serial number exchange. The count-up

trigger allows the serial number to automatically in-

cremented after each complete serial number ex-

change is sent.

• M1, M2, M3 and M4 can be set. (default: M2)

This item shows the current number for the count-up

trigger channel set above.

• Rotate the main dial to change the number, or push

[F-3•001CLR] for 1 sec. to reset the current number

to 001.