Operation Manual

12-27

■ Changing the file name

The file name, saved in the CF card, can be re-named

from the transceiver as desired.

q During setting save screen display, push

[F-1•DIR/FILE] to select tree view screen.

• Push [F-2•Y] or [F-3•Z] to select the desired folder.

•“DECODE,” “SETTING” and “VOICE” folders are avail-

able as the default.

• After the folder is selected, push [F-2•Ω≈] for 1 sec. to

display content folder(s), if available.

w Push [F-1•DIR/FILE] to select file list screen.

e Push [F-2•Y] or [F-3•Z] to select the desired file.

r Push [F-5•REN/DEL] momentarily to select the file

name edit condition.

t Push [ABC], [123] or [Symbol] to select the charac-

ter group, then rotate the main dial to select the

character.

• [ABC] : A to Z (capital letters); [123]: 0 to 9 (numerals);

[Symbol]: ! # $ % & ‘ ` ^ + – = ( ) [ ] { } _ ~ @ can be se-

lected.

• Push [F-1•Ω] to move the cursor left, push [F-2•≈] to

move the cursor right, push [F-3•DEL] to delete a char-

acter and push [F-4•SPACE] to insert a space.

• Pushing the transceiver’s keypad, [0]–[9], can also enter

numerals.

y Push [EXIT/SET] to set the file name.

[F-1•DIR/FILE]

[F-5•REN/DEL][F-4•Ω ≈]

[F-6•MAKE]

[F-7•WIDE]/[F-7•CANCEL]

[F-3•Z][F-2•Y]

[EXIT/SET]

SET MODE