Operation Manual

12-26

SET MODE

■ File loading

By loading the saved setting file from the CF card, you

can easily set up another IC-7800— several operators

settings can easily be applied to one IC-7800.

q During set mode menu screen indication, push

[F-7•CF CARD] to select CF card set menu screen.

w Push [F-1•LOAD] to select setting load screen.

• The indicator beside the CF card slot blinks.

• After the CF card contents are displayed, the indicator

goes off.

e Push [F-5•OPTION] to select load option set mode,

then set the desired loading conditions, if desired.

• See page 12-24 for details.

r Push [F-2•Y] or [F-3•Z] to select the desired set-

ting file.

t Push [F-4•LOAD].

• Confirmation screen appears.

y Push [F-6•OK] to starts loading.

• After the loading is completed, the message dialog, “Re-

boot the IC-7800,” appears.

u Turn the transceiver power OFF then ON to make

the setting effective .

[F-1•DIR/FILE]

[F-5•OPTION][F-4•LOAD]

[F-6•SORT]/[F-6•OK]

[F-7•WIDE]/[F-7•CANCEL]

[F-3•Z][F-2•Y]

[EXIT/SET]