Operation Manual

12-10

SET MODE

Adjusts the internal reference signal frequency within

0 to 100% range in 1% steps during frequency cali-

bration. (default: 50%)

Selects the transceiver’s reference signal condition

from IN, OFF and OUT.

• IN : Use an external reference signal for the IC-

7800.

• OFF : Not input/output the reference signal.

(default)

• OUT : Outputs the IC-7800 reference signal to ex-

ternally connected equipment(s) for their ref-

erence.

NOTE: If the applied reference signal is off-fre-

quency, or no signal is applied with “IN” selection,

the IC-7800 will not work properly. Select “OFF” or

“OUT” then reboot the IC-7800 in such case.

■ ACC set mode (continued)