Operation Manual

12-6

SET MODE

■ Level set mode (continued)

Sets the ratio for audio output level from the head-

phone toward to the internal speaker within 0.60 to

1.40 range in 0.01 steps. (default: 1.00)

Selects the headphone audio output. • OFF : Outputs the main band’s audio from the left,

and sub band’s audio from the right. (default)

• ON : Outputs the mixed audio.

Selects the desired band for the audio and squelch

signals output from [ACC1–A] (Audio: pin 5, Squelch:

pin 6) from MAIN and SUB.

• MAIN : Main band’s AF and squelch signals are

output from [ACC1–A]. (default)

• SUB : Sub band’s AF and squelch signals are out-

put from [ACC1–A].

Selects the desired band for the audio and squelch

signals output from [ACC1–B] (Audio: pin 5, Squelch:

pin 6) from MAIN and SUB.

• MAIN : Main band’s AF and squelch signals are

output from [ACC1–B].

• SUB : Sub band’s AF and squelch signals are out-

put from [ACC1–B]. (default)

Sets the desired audio output level, output from

[ACC1–A], within 0 to 100% in 1% steps.

• Outputs approx. 200 mV at 50% (default) setting.

Sets the desired audio output level, output from

[ACC1–B], within 0 to 100% in 1% steps.

• Outputs approx. 200 mV at 50% (default) setting.

Sets the desired output level of [S/P DIF], within 0 to

100% in 1% steps. (default: 100%)

Sets the desired audio input level for modulation from

[ACC1–A].

• Approx. 100 mV at 50% (default) setting.

■ ACC set mode