Operation Manual

12-2

■ Set mode description

Set mode is used for programming infrequently

changed values or conditions of functions. The IC-

7800 has a level set mode, display set mode, timer set

mode, accessory set mode, miscellaneous (others) set

mode and CF card set mode.

Set mode operation

q Push [EXIT/SET] several times to close a multi-

function screen, if necessary.

w Push [F-7•SET] to select set mode menu screen.

• Pushing and holding [EXIT/SET] for 1 sec. also selects

set mode menu screen.

e Push [F-1•LEVEL], [F-2•ACC], [F-3•DISP],

[F-4•TIME], [F-5•OTHERS] or [F-7•CF CARD] to

enter the desired set mode.

r For level, accessory, display and miscellaneous

(others) set mode, push [F-7•WIDE] to toggle wide

and normal screen.

t Push [F-1•Y] or [F-2•Z] to select the desired item,

then rotate main dial to adjust/select the desired

value or condition.

• Pushing [F-3•Ω≈] operation may be necessary for

some items.

y Push [EXIT/SET] twice to exit set mode.

[F-1•LEVEL] [F-2•ACC]

[F-3•DISP]

[F-5•OTHERS][F-4•TIME]

[EXIT/SET] Main dial

[F-7•CF CARD]

SET MODE