Operation Manual

11-2
■ Time set mode
The IC-7800 has a built-in calendar and 24-hour clock
with daily power ON/OFF timer functions. Before oper-
ating these timer functions, set the current date and
time.
q Push [EXIT/SET] to close multi-function screen, if
necessary.
w Push [F-7•SET] to select set mode menu screen.
e Push [F-4•TIME] to select time set mode.
r Push [F-1•Y] or [F-2•Z] to select the desired item.
t Rotate the main dial to set or select the desired
value or condition.
y Push [EXIT/SET] to exit time set mode.
[EXIT/SET][F-4•DEF]
[ABC]/[abc] [123]/[Symbol] [F-3•Ω ≈][F-5•EDIT]/[F-5•SET]
[F-1•Y] [F-2•Z] Main dial
11
CLOCK AND TIMERS
Sets the date.
z Push [F-3•Ω≈] to select between the year and the
month/day, then rotate the main dial to select them.
• The date setting and “DATE-set Push [SET]” indication
blink.
x Push [F-5•SET] to set the date.
Sets the local time.
z Rotate the main dial to set the local time.
• The time setting and “TIME-set Push [SET]” indication
blink.
x Push [F-5•SET] to set the time.
Turns the clock 2 indication ON and OFF.
The clock 2 is convenient to indicate the UTC or other
country’s local time, etc.
• ON : The clock 2 is displayed below the local time
indication.
• OFF : The clock 2 does not display.
Sets the desired off-set time period for clock 2 display
within –24:00 to +24:00 in 5 min. steps.
• Push [F-4•DEF] for 1 sec. to select the default value.
Sets the desired 3-character name for clock 2.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ’ ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } | _
~
@)
and spaces can be used.
z Push [F-5•EDIT] to select the name edit condition.
• The cursor under the 1st character blinks.
x Push [ABC], [abc], [123] or [Symbol] to select the
character group, then rotate the main dial to select
the character.
• Push [ABC] or [abc] to toggle capital and small letters.
• Push [123] or [Symbol] to toggle numerals and sym-
bols.
• Push [F-1•Ω] or [F-2•≈] for cursor movement.
• Push [F-3•DEL] to delete the selected character.
• Push [F-4•SPACE] to input a space.
• Pushing the transceiver’s keypad, [0]–[9], can also
enter numerals.
c Push [EXIT/SET] to set the name.