Operation Manual

9-7
■ Setting select memory channels
DD
Setting in scan screen
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Select memory mode.
e Push [F-5•SCAN] to select the scan screen.
r Select the desired memory channel to set as a se-
lect memory channel.
• [Y]/[Z] keys and direct keypad selections can be used.
t Push [F-3•SELECT] several times to set the mem-
ory channel as a select memory ★1, ★2, ★3 or not.
y Repeat steps r to t to program another memory
channel as a select memory channel, if desired.
u Push [EXIT/SET] to exit the scan screen.
DD
Setting in memory list screen
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [F-4•MEMORY] to select memory list screen.
e Rotate the main dial while pushing [F-1•ROLL] or
[F-2•SET] to select the desired memory channel.
• [Y]/[Z] keys and direct keypad selections can be used.
r Push [F-3•SELECT] several times to set the mem-
ory channel as a select memory ★1, ★2, ★3 or not.
t Repeat steps e to r to program another memory
channel as a select memory channel, if desired.
y Push [EXIT/SET] to exit the memory list screen.
DD
Erasing the select scan setting
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [F-4•MEMORY] to select memory list screen,
or push [F-5•SCAN] to select scan screen.
e Push [F-3•SELECT] for 1 sec. to display memory
select all clear window.
r Push one of the following keys to clear all select
scan setting.
[F-1•★1] : Clears all ★1 setting.
[F-2•★2] : Clears all ★2 setting.
[F-3•★3] : Clears all ★3 setting.
[F-4•★1,2,3] : Clears all select setting.
t Push [EXIT/SET] to exit the memory list screen.
9
SCANS