Operation Manual

9-5
Fine programmed scan/fine F scan
In fine scan (programmed or F), the scan speed de-
creases when the squelch opens, but the transceiver
keeps scanning. The scanning tuning step shifts from
50 Hz to 10 Hz when the squelch opens.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [F-5SCAN] to select the scan screen.
e Set for programmed scan or F scan as described
on previous page.
r Push [F-1PROG] or [F-2F] to start a scan.
•“ or “” and decimal points
blink while scanning.
t Push [F-3FINE] to start a fine scan.
•“ or “” blinks
instead of “” or , respec-
tively.
y When the scan detects a signal, the scan speed de-
creases but scan does not stop.
u Push [F-1PROG] or [F-2F] to stop the scan; push
[F-3FINE] to cancel the fine scan.
Rotating the main dial also cancels the scan.
i Push [F-6RECALL] for 1 sec. to recall the fre-
quency that is set before starting the scan, if de-
sired.
[F-2F][F-1PROG] [F-3FINE] [EXIT/SET]
9
SCANS