Operation Manual

7-7
■ Programming a memory name
Memory channels can be tagged with alphanumeric
names of up to 20 characters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? “ ‘ ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } | _
~
@)
and spaces can be used. (See the table below.)
q Record a message as described in page 7-6.
w During the voice mic. record screen indication, push
[F-5•NAME] to enter memory name edit condition.
• A cursor appears and blinks.
e Push [F-7•T1..T4] several times to select the desired
voice memory.
r Input the desired character by rotating the main dial
or by pushing the band key for number input.
• Push [ABC] or [abc] to toggle capital and small letters.
• Push [123] or [Symbol] to toggle numerals and symbols.
• Push [F-1•Ω] or [F-2•≈] for cursor movement.
• Push [F-3•DEL] to delete the selected character.
• Push [F-4•SPACE] to input a space.
• Pushing the transceiver’s keypad, [0]–[9], can also enter
numerals.
t Push [EXIT/SET] to input and set the name.
• The cursor disappears.
y Repeat steps e to t to program another voice
memory’s name, if desired.
u Push [EXIT/SET] twice to exit the voice recorder
screen.
• Voice memory name editing example
• Usable characters
[F-1•Ω] [F-2•≈] [F-4•SPACE] [F-7•T1..T4]
[F-3•DEL] Keypad[ABC]/[abc] [123]/[Symbol]
7
VOICE RECORDER FUNCTIONS
Key selection Editable characters
A to Z (capital letters)
a to z (small letters)
0 to 9 (numbers)
! # $ % & ¥ ? “ ‘ ` ^ + – ✱ / . , : ; =
< > ( ) [ ] { } | _
~
@