User Guide

5
28
SET MODE
■ General
Set mode is used for programming infrequently
changed values or conditions of functions. The IC-78
has 2 separate set modes: quick set mode and initial
set mode .
D Quick set mode operation
q While power is ON, push [SET] for 1 sec.
• Quick set mode is selected and one of its items ap-
pears.
w Push [UPY] or [Z DN] to select the desired item.
e Rotate the main dial to set the values or conditions
for the selected item.
r Repeat w and e to set other items.
t To exit quick set mode, push [SET] momentarily.
D Initial set mode operation
q Push [PWR] for 1 sec. to turn power OFF.
w While pushing and holding [SET], push [PWR] to
turn power ON.
• Initial set mode is selected and one of its items appears.
e Push [UPY] or [Z DN] to select the desired item.
r Rotate the main dial to set the values or conditions
for the selected item.
t Repeat e and r to set other items.
y To exit initial set mode, push [PWR] for 1 sec. to
turn power OFF.
u Push [PWR] to turn power ON again.
• The conditions selected in initial set mode are now ef-
fective.
Item
Value of
Condition
Item
Value of
condition
[DISPLAY EXAMPLE: INITIAL SET MODE]
[DISPLAY EXAMPLE: QUICK SET MODE]
[DIAL]
[√]
[∫]
[SET]
[DIAL]
[PWR]
[√]
[∫]
[SET]