User Guide

SPECIFICATIONS

General

• Frequency coverage

TX : 450–480 MHz

(includes all 40 CB channels)

RX : 450–520 MHz

• Mode : 16K0F3E (FM)

• Channel spacing

CB channel : 25 kHz

Private channel : 12.5/25 kHz

• Current drain (at 7.2 V) : TX (at 5 W) 1.9 A

Max. audio 300 mA max.

• Power supply requirement : 7.2 V DC nominal*

(negative ground)

*Speciﬁed Icom’s battery pack only

• Frequency stability : ±2.5 ppm

(–30°C to + 60°C)

• Antenna impedance : 50 Ω nominal

• Dimensions : 53.0(W) ×120.0(H) ×32.5(D) mm

(Projections not included)

• Weight : Approx. 320 g (including BP-232N)

Transmitter

• Output power : 5 W

• Modulation system : Variable reactance frequency

modulation

• Max. frequency deviation : ±5.0 kHz

• Spurious emissions : 70 dB min

• Adjacent channel power : 75 dB (typical)

• External mic. connector : 3-conductor 2.5 (d) mm/2.2 kΩ

Receiver

• Receive system : Double conversion

superheterodyne

• Sensitivity (12 dB SINAD) : –12 dBµ (typical)

• Squelch sensitivity : –12 dBµ (typical; Threshold)

• Intermodulation rejection ratio : 74 dB (typical)

• Spurious response rejection ratio : 70 dB min

• Adjacent channel selectivity : 75 dB (typical)

• Audio output power : 0.5 W (typical) at 5% distortion

with an 8 Ω load

• External speaker connector : 2-conductor 3.5 (d) mm/8 Ω

All stated specifications are subject to change without

notice or obligation.