User Guide

PROGRAMMABLE FUNCTIONS

DTMF TRANSMISSION

This function allows you to send a pre-programmed DTMF code to

control a repeater, open another transceiver’s squelch, etc.

Manual transmission:

Push desired digit keys in sequence while pushing [PTT].

• Pushing [PTT] may not be necessary depending on programming.

Automatic pre-programmed transmission:

q Push the [DTMF] switch to select DTMF autodial mode, then

push [Y] or [Z] to select the desired channel.

w Push the [DTMF] switch once more to send a DTMF code.

DTMF RE-DIAL FUNCTION

This function allows you to transmit the last-used DTMF code at the

push of a key.

Push the [DTMF RE-DIAL] switch momentarily to activate the func-

tion.

• The previously transmitted DTMF code is automatically transmit-

ted.

• If no code has been transmitted since turning the power ON, this

function does not activate.

EMERGENCY FUNCTION

The emergency function allows you to send your ID quickly and

easily to your Base Station, etc. in case of emergency.

Push and hold the [EMERGENCY] switch for 1 sec. to activate the

emergency function.

• The transceiver selects a pre-programmed channel, then sends

an emergency signal to your Base Station.

• The pre-programmed channel remains selected until a control sig-

nal is received from the Base Station, or power is turned OFF.

IC- 3FGX 03.12.8 14:20 Page 17 (1,1)