(8 TUNING CONTROL (G DOWN/UP SWITCH 1 TONE SWITCH (IC:28A USIA. version) rOE CALL: SWITCH except U8 A version) CALL (@ WRITE SWITCH WRITE: Initiate MEMORY mads; the SET SWITCH: controls the skip function. T The skip function: allows memory channels o be deleted from the normal scanning sequence when memories are being scanned.: Refer to: SECTION |55 3 'MEMORY. CHANNEL SCANNING.
W INSTALLING PL-259 CONNECTORS W MICROPHONE M EXTERNAL SPEAKER 11 :hide the coupling ring over the coaxial cable, 2} Stripper cable as in'the figure and s about 172 0{13mm) of the shield conductor. 35 Remove the doter: plastic casing and stein the center conductor insulation sin the figure. Tia the center constrictor. 41:Slide the connector body onto the cable and solder.
5.2 MEMORY MODE W MEMORY READING @ Select MEMORY mode. AL USING THE TUNING CONTROL B USING THE DOWN/UR SWITCH © USING THE MICROPHONE B MEMORY. PROGRAMMING Expatiates: Store 144 Seldom in metro chanson 10; 11" Selassie memory: channel 10 Memory channels 11 through: 21 are: useful for storing often-user frequencies: Conversationalist: ot the except: the ELSA: version: ‘channel 1271 s reserved for: the call function frequency.
