User manual

17
6
DSC OPERATION
6
■ DSC address ID
A total of 100 DSC address IDs can be programmed and
named with up to 10 characters.
D
Programming Individual ID
q Push [MENU] to enter the DSC menu.
w Rotate [DIAL] to select “
Set uup
,” push [DIAL•ENTER].
e Rotate [DIAL]
to select “
Add:INDV IID
,” push
[DIAL•ENTER] .
r Rotate [DIAL] to s et the individual ID and ID name.
• Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor forward
or backward, respectively.
• Push [CLR] to cancel and return to the set up menu.
• “
Full IID
” appears when 100 DSC address IDs are already
set.
• After inputting the 9-digit MMSI number, push [DIAL•ENTER] or
[16•9] to enter a 10-character ID name.
t After inputting, push [DIAL•ENTER] to program.
y Push [CLR] or rotate [DIAL] to select “
Exit
,” push
[DIAL•ENTER].
• Returns to the DSC menu.
• Repeat again to return to the normal operation condition.
--DSC Menu--
Add:Individual ID
Input 9 digits
_________
Input name
_________
<CLR˘Exit / ENT˘OK>
--DSC Menu--
Set up
˘Add:INDV ID
Add:Group ID
DEL:INDV ID
DEL:Group ID
Offset Time
MMSI Check
--DSC Menu--
Select Item
Position Report
Polling Request
Received Calls
Distress Setting
˘Set up
Exit