Tuzio® Milano Towel Warmer Installation Guide Code: H7023 / H7024 23.5” x 31” Hydronic Technical Helpline: Toll-Free 1-877-757-8990 www.icocanada.
Congratulations! You are the proud owner of a quality Tuzio Towel Warmer. This product has been specifically engineered and tested to provide optimal comfort and satisfaction. ICO carries a broad range of luxury bathroom products designed to make everyday living just a little more enjoyable! Visit www.icocanada.com to learn more.
Towel Warmer Installation Procedure 1 Rough-in Requirements - for constant circulation heating system (see figure 1) Using this installation method, the towel warmer is controlled using the valves attached to the towel warmer, and can be operated independently from the heating system. This method of installation is popular where there are multiple heating appliances connected to a closed hot water heating system, and electronic control of the individual towel warmer is not important.
Towel Warmer Installation Procedure 1 Rough-in Requirements - for dedicated heating system (see figure 2) Using this installation method, the towel warmer is controlled using the thermostat wired to the circulator pump, and cannot be operated independently from the heating system. This method of installation is popular where there is only one heating appliance connected to a closed hot water heating system, and electronic control of the individual towel warmer is required. 1.
Towel Warmer Installation Procedure 2 Installation Instructions (see figure 3) 1. Check all items have been received. You should have Towel Warmer and mounting bracket kit. Read all instructions before continuing. 2. Fix wall supports "B" including collar “A” to the wall using the screws provided and in locations as shown on figure 2. 3. Screw the threaded pin "C", into the threaded bushing “D”. 4. Hang and adjust the Towel Warmer using set screws "E" to lock pin "C" in the wall bracket "B".
Specifications & Drawings (wall rough-in) Model # Description Finish Weight (lb) Output WxH (mm) WxH (Inches) Metal Type H7023 Milano Hydronic Chrome 15.6 1160Btu 600 x 790 23.5” x 31” Mild Steel H7024 Milano Hydronic Brushed Nickel 15.6 1160Btu 600 x 790 23.5” x 31” Stainless Steel A1043 Thermostatic Angle Valve Chrome 2.0 - - - Brass A1044 Thermostatic Angle Valve Brushed Nickel 2.0 - - - Brass A3013 8” Installation Pack Chrome 0.
Specifications & Drawings (floor rough-in) Model # Description Finish Weight (lb) Output WxH (mm) WxH (Inches) Metal Type H7023 Milano Hydronic Chrome 15.6 1160Btu 600 x 790 23.5” x 31” Mild Steel H7024 Milano Hydronic Brushed Nickel 15.6 1160Btu 600 x 790 23.5” x 31” Stainless Steel A1053 Thermostatic Straight Valve Chrome 2.0 - - - Brass A1054 Thermostatic Straight Valve Brushed Nickel 2.0 - - - Brass A3103 24” Installation Pack Chrome 1.
Towel Warmers Electric In-Floor Heating Insulation Board
