Tuzio® Thames Towel Warmer Installation Guide Code: H6073 / H6074 / H6076 23.5” x 37.75” x 5” Hydronic Technical Helpline: Toll-Free 1-877-757-8990 www.icocanada.
Congratulations! You are the proud owner of a quality Tuzio Towel Warmer. This product has been specifically engineered and tested to provide optimal comfort and satisfaction. ICO carries a broad range of luxury bathroom products designed to make everyday living just a little more enjoyable! Visit www.icocanada.com to learn more.
Towel Warmer Installation Procedure 1 Rough-in Requirements - for constant circulation heating system (see figure 1) Using this installation method, the towel warmer is controlled using the valves attached to the towel warmer, and can be operated independently from the heating system. This method of installation is popular where there are multiple heating appliances connected to a closed hot water heating system, and electronic control of the individual towel warmer is not important. 1.
Towel Warmer Installation Procedure 1 Rough-in Requirements - for dedicated heating system (see figure 2) Using this installation method, the towel warmer is controlled using the thermostat wired to the circulator pump, and cannot be operated independently from the heating system. This method of installation is popular where there is only one heating appliance connected to a closed hot water heating system, and electronic control of the individual towel warmer is required. 1.
Towel Warmer Installation Procedure 2 Installation Instructions (see figure 3) 1. Check all items have been received. You should have Towel Warmer and mounting discs including fixings. Read all instructions before continuing. 2. Fix mounting discs "A" using the screws provided and in locations as shown on figure 2. 3. Mount towel warmer and slide brackets “B” over mounting discs “A”. 4. Fasten Towel Warmer using set screws "C" to lock mounting discs “A" into brackets "B".
Specifications & Drawings (wall rough-in) Model # Description Finish Weight (lb) Output WxHxD (mm) WxHxD (Inches) Metal Type H6073 Thames Hydronic Chrome 15.8 2600Btu 600 x 960 x 130 23.5” x 37.75” x 5” Mild Steel H6074 Thames Hydronic Brushed Nickel 15.8 2600Btu 600 x 960 x 130 23.5” x 37.75” x 5” Mild Steel H6076 Thames Hydronic Polished Nickel 15.8 2600Btu 600 x 960 x 130 23.5” x 37.75” x 5” Mild Steel A1063 Traditional Gate Valve Chrome 2.
Specifications & Drawings (floor rough-in) Model # Description Finish Weight (lb) Output WxHxD (mm) WxHxD (Inches) Metal Type H6073 Thames Hydronic Chrome 15.8 2600Btu 600 x 960 x 130 23.5” x 37.75” x 5” Mild Steel H6074 Thames Hydronic Brushed Nickel 15.8 2600Btu 600 x 960 x 130 23.5” x 37.75” x 5” Mild Steel H6076 Thames Hydronic Polished Nickel 15.8 2600Btu 600 x 960 x 130 23.5” x 37.75” x 5” Mild Steel A1063 Traditional Gate Valve Chrome 2.
Towel Warmers Electric In-Floor Heating Insulation Board
