Tuzio® Thames Wall Mount Towel Warmer Installation Guide Code: E6083 / E6084 / E6086 23.5” x 34.5” x 5” Electric Plug-In Technical Helpline: Toll-Free 1-877-757-8990 www.icocanada.
Towel Warmer Installation Procedure 1 Rough-in Requirements (see figure 3) 1. A 110V receptacle located no further than 18” from electric plug-in exit location on towel warmer (see fig. 2), and not above electric plug-in exit location. 2. Wall studs or plywood backing is required in the wall at all bracket locations. See figure 2 for bracket locations. 2 Installation Instructions (see figure 1) 1. Check all items have been received. You should have Towel Warmer and mounting discs including fixings.
Specifications & Drawings Model # Description Finish Weight (lb) Element Size Output WxH (mm) WxH (Inches) Metal Type E6083 Thames Wall Mount Electric Plug-In Chrome 31 150W 2512Btu 600 x 875 23.5” x 34.5” Mild Steel E6084 Thames Wall Mount Electric Plug-In Brushed Nickel 31 150W 2512Btu 600 x 875 23.5” x 34.5” Mild Steel E6086 Thames Wall Mount Electric Plug-In Polished Nickel 31 150W 2512Btu 600 x 845 23.5” x 34.
Towel Warmers Electric In-Floor Heating Insulation Board