Tuzio® Woodstock Towel Warmer Installation Guide Code: E6013 / E6014 / E6016 26.5” x 37” x 5.5” Electric Plug-In Technical Helpline: Toll-Free 1-877-757-8990 www.icocanada.
Towel Warmer Installation Procedure 1 Rough-in Requirements (see figure 3) 1. A 110V receptacle located no further than 18” from electric plug-in exit location on towel warmer (see fig. 2), and not above electric plug-in exit location. 2. Wall studs or plywood backing is required in the wall at all bracket locations. See figure 2 for bracket locations. 2 Installation Instructions (see figure 1) 1. Check all items have been received. You should have Towel Warmer and mounting discs including fixings.
Specifications & Drawings Model # Description Finish Weight (lb) Element Size Output WxH (mm) WxH (Inches) Metal Type E6013 Woodstock Electric Plug-In Chrome 32.0 150W 832Btu 675 x 940 x 140 26.5” x 37” x 5.5” Mild Steel E6014 Woodstock Electric Plug-In Brushed Nickel 32.0 150W 832Btu 675 x 940 x 140 26.5” x 37” x 5.5” Mild Steel E6016 Woodstock Electric Plug-In Polished Nickel 32.0 150W 832Btu 675 x 940 x 140 26.5” x 37” x 5.
Towel Warmers Electric In-Floor Heating Insulation Board
