Tuzio® Sorano Towel Warmer Installation Guide Code: E4703 / E4704 / E4705 / E4706 19.5” x 64.25” Electric Plug-In Technical Helpline: Toll-Free 1-877-757-8990 www.icocanada.
Towel Warmer Installation Procedure 1 Rough-in Requirements (see figure 3) 1. A 110V receptacle located no further than 18” from electric plug-in exit location on towel warmer (see fig. 2), and not above electric plug-in exit location. 2. Wall studs or plywood backing is required in the wall at all bracket locations. See figure 2 for bracket locations. 2 Installation Instructions (see figure 1) 1. Check all items have been received. You should have Towel Warmer and mounting bracket kit.
Specifications & Drawings Model # Description Finish Weight (lb) Element Size Output WxH (mm) WxH (Inches) Metal Type E4703 Sorano Electric Plug-In Chrome 33.7 300W 1700Btu 500 x 1630 19.5” x 64.25” Mild Steel E4704 Sorano Electric Plug-In Brushed Nickel 33.7 300W 1700Btu 500 x 1630 19.5” x 64.25” Stainless Steel E4705 Sorano Electric Plug-In Matte Black 33.7 450W 1700Btu 500 x 1630 19.5” x 64.25” Mild Steel E4706 Sorano Electric Plug-in Polished Nickel 33.
Towel Warmers Electric In-Floor Heating Insulation Board
