Tuzio® Sorano Towel Warmer Installation Guide Code: E4103 / E4104 / E4105 / E4106 19.5” x 31” Electric Plug-In Technical Helpline: Toll-Free 1-877-757-8990 www.icocanada.
Towel Warmer Installation Procedure 1 Rough-in Requirements (see figure 3) 1. A 110V receptacle located no further than 18” from electric plug-in exit location on towel warmer (see fig. 2), and not above electric plug-in exit location. 2. Wall studs or plywood backing is required in the wall at all bracket locations. See figure 2 for bracket locations. 2 Installation Instructions (see figure 1) 1. Check all items have been received. You should have Towel Warmer and mounting bracket kit.
Specifications & Drawings Model # Description Finish Weight (lb) Element Size Output WxH (mm) WxH (Inches) Metal Type E4103 Sorano Electric Plug-In Chrome 18.0 150W 846Btu 500 x 790 19.5” x 31” Mild Steel E4104 Sorano Electric Plug-In Brushed Nickel 18.0 150W 846Btu 500 x 790 19.5” x 31” Stainless Steel E4105 Sorano Electric Plug-In Matte Black 18.0 300W 846Btu 500 x 790 19.5” x 31” Mild Steel E4106 Sorano Electric Plug-In Polished Nickel 18.
Towel Warmers Electric In-Floor Heating Insulation Board
