Tuzio® Savoy Towel Warmer Installation Guide Code: E1101 & E1103 15.75” x 25.5” Electric Plug-In Technical Helpline: Toll-Free 1-877-757-8990 www.icocanada.
Towel Warmer Installation Procedure 1 Rough-in Requirements (see figure 3) 1. A 110V receptacle located no further than 18” from electric plug-in exit location on towel warmer (see fig. 2), and not above electric plug-in exit location. 2. Wall studs or plywood backing is required in the wall at all bracket locations. See figure 2 for bracket locations. 2 Installation Instructions (see figure 1) 1. Check all items have been received. You should have Towel Warmer and mounting bracket kit.
Specifications & Drawings Model # Description Finish Weight (lb) Element Size Output WxH (mm) WxH (Inches) Metal Type E1101 Savoy Electric Plug-In White 17.0 150W 1266Btu 400 x 640 15.75” x 25.5” Mild Steel E1103 Savoy Electric Plug-In Chrome 17.0 150W 1266Btu 400 x 640 15.75” x 25.5” Mild Steel Heating Element Specifications: 150 watt, 12" long, 120 volt, 60 Htz, IP55 cord, ULC approved. Includes 4ft cord and factory fitted plug.
Towel Warmers Electric In-Floor Heating Insulation Board
