Tuzio® Savoy Towel Warmer Installation Guide Code: E1061 & E1063 29.5” x 47.75” Electric Plug-In Technical Helpline: Toll-Free 1-877-757-8990 www.icocanada.
Towel Warmer Installation Procedure 1 Rough-in Requirements (see figure 3) 1. A 110V receptacle located no further than 18” from electric plug-in exit location on towel warmer (see fig. 2), and not above electric plug-in exit location. 2. Wall studs or plywood backing is required in the wall at all bracket locations. See figure 2 for bracket locations. 2 Installation Instructions (see figure 1) 1. Check all items have been received. You should have Towel Warmer and mounting bracket kit.
Specifications & Drawings Model # Description Finish Weight (lb) Element Size Output WxH (mm) WxH (Inches) Metal Type E1061 Savoy Electric Plug-In White 52.2 300W 3816Btu 750 x 1210 29.5” x 47.75” Mild Steel E1063 Savoy Electric Plug-In Chrome 52.2 300W 3816Btu 750 x 1210 29.5” x 47.75” Mild Steel Heating Element Specifications: 600 watt, 29.5" long, 120 volt, 60 Htz, IP55 cord, ULC approved. Includes 4ft cord and factory fitted plug.
Towel Warmers Electric In-Floor Heating Insulation Board