Submittal Sheet

www.icmcontrols.com | 1-800-365-5525 | [e-mail]
7313 William Barry Blvd. North Syracuse, NY 13212
Scan for full specs, app
guides, wiring & more
ICM2918
Universal Intermittent Pilot Ignition Control
■
Control voltage: 18-30 VAC @ 50/60 Hz
■
Trial for ignition: 15 or 90 seconds (switch settable)
■
Operating temperature: -40°F (-40°C) to 165°F (74°C)
■
Relative humidity: 5% - 95% (non-condensing) at +55°C
■
Pre-purge time: 0 sec or 30 sec (switch settable)
■
Green status LED: System status and error codes
■
Yellow flame LED: Flame presence and flame strength
■
Dimensions: 5.50” x 4.00” x 2.00”
SPECIFICATIONS
√ Universal intermittent pilot gas ignition control
√ Provides ignition sequence, flame monitoring and safety shuto for single/
dual rod intermittent pilot control applications
√ For gas red furnaces, boilers and other heating applications
√ Switch selectable pre-purge and ignition trials with permanent lock
√ Works with or without vent damper connected
√ Works with both Natural Gas and LP Gas systems
FEATURES
CERTIFIEDTOANSIZ21.20
LIS409
APPLICATIONS:
APPLIANCE | ELECTRICAL | HVAC/R | MARINE | POOL & SPA | RV
■
Honeywell: S8610U (and compatible Camstat, Fenwall, HSC, Johnson Controls,
Robertshaw and White-Rodgers models). Please visit the website for a complete
list of units the ICM2918 directly replaces.
REPLACES
The ICM2918 Universal Intermittent Pilot Gas Ignition Control Module
replaces many popular flame rectication type of intermittent pilot
ignition (IPI) modules, including those manufactured by Honeywell,
Robertshaw, and Johnson Controls.
OVERVIEW
Exported and signed o on
08-07-21