Specifications

7
Charging the BeBook Pure
Charge the BeBook Pure with the supplied USB Cable and a PC or
notebook. Charge the BeBook Pure for at least four hours before first
use.
Make sure the PC is switched on. Connect the USB cable to the BeBook
Pure and connect the other end to a USB port on your PC or notebook.
The USB connection screen will appear. The BeBook Pure is now
connected to your PC. The LED light on top of the BeBook Pure will
light up to indicate the BeBook Pure is being charged.
The BeBook Pure needs to charge for approximately four hours. The
LED light on top of the BeBook Pure will switch off to indicate that the
device is fully charged.
To charge your BeBook Pure without a PC or notebook, use the BeBook
USB Travel Adapter (separately available).
Battery tips:
To use the BeBook Pure during charging, remove the device from your
PC or notebook. Use your computers “Safely Remove Hardware”
function and leave the USB cable attached to both the BeBook Pure
and PC or notebook.
Make sure you recharge the BeBook Pure in time. When discharged
fully the lifetime of the battery strength may decrease.