User's Manual

FOREWORD

This manual provides user information on the IceTag3D™ motion sensor for animal activity

recording, including IceTagAnalyser 2008 software and IceReader™ desktop reader unit. The

system is designed by IceRobotics Ltd, Logan Building, Roslin BioCentre, Roslin, Midlothian,

Scotland, UK, EH25 9TT. The content includes detailed installation and operating instructions.

SOFTWARE LICENCE AGREEMENT

This is a legal agreement between you, the end user, and IceRobotics Ltd. Read this

agreement very carefully. If you do not wish to accept this agreement, do not install or use the

software product.

1. Grant of Licence: Each grant of licence permits you to install and use the associated

version of the IceTagAnalyser™ 2008 software on multiple computers, with no more than

one copy in use at any time.

2. Copyright: The software is owned by IceRobotics Ltd and is protected by United Kingdom

ownership rights, and intellectual property rights in and to the software shall remain with

IceRobotics Ltd. You may not modify, adapt, translate, reverse engineer, decompile,

disassemble or otherwise attempt to discover the code and algorithms of the software.

3. Other restrictions : Except as expressly permitted in this licence agreement or with written

permission from IceRobotics Ltd, the software may not be used, copied, redistributed,

retransmitted, published, sold, rented, leased, marketed, sublicenced, assigned,

transferred, altered or modified.

4. No Warranty: The software is delivered as is and IceRobotics Ltd makes no warranty as to

its use or performance. IceRobotics Ltd does not, and cannot warrant the performance or

results you may obtain by using the Software or its documentation. IceRobotics Ltd makes

no warranties, expressed or implied, as to non-infringement of third party rights,

merchantability, or fitness for any particular purpose. In no event will IceRobotics Ltd be

liable to you for any consequential, incidental or special damages, or for any claim by any

third party.

FCC STATEMENT

“This device complies with part 15 of the FCC Rules. Operation is subject to the condition that

this device does not cause harmful interference”

USER STATEMENTS

The user is cautioned that changes / modifications not approved by the responsible party

could void the user‟s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

The device carrier frequency is 127KHz and has a peak output power of -36.1dBmicroV/m at

300m.

The Category II Radio communication device (127 kHz TX) complies with Industry Canada

Standard RSS-310. Ce dispositif de radio communication de catégorie II (127 kHz) respecte

la norme CNR-310 d‟Industrie Canada.