Specification

Bidet Seats
Compliance Cercaons
• Conforms to UL STD 1431
• Cered to CSA STD C22.2 No. 64 & 68
• ETL cered
Colors
White .01
Rated Voltage AC 120V, 50/60Hz
Rated Power Consumpon 1300W
Water Supply System
Direct connecon
with tap water
Waterproof Rang IPX4
Power Cord Length 1.5M (5)
Bidet
Spray
Water Heang Ceramic Heater
Rear Wash Maximum 800cc
Front Wash Maximum 800cc
Power Wash Maximum 800cc
Water
Temperature
86°F (30°C), 97°F (36°C),
100°F (38°C), 104°F (40°C)
Heater Capacity 1200W
Safety Device
Thermal cuto, thermo
switch, water level sensor
Deodorizaon Automac deodorizer
Heated
Seat
Seat
Temperature
Ambient, 97°F (36°C),
100°F (38°C), 104°F (40°C)
Heater Capacity Maximum 55W
Safety Device
Thermal cuto,
temperature sensor
Warm Air
Dryer
Dryer
Temperature
Room temperature -
maximum 113°F (45°C)
Heater Capacity Maximum 250W
Safety Device Thermal cuto, Bimetal
Lighng LED Light
Inlet Water Temperature 41°F - 95°F (5°C - 35°C)
Ambient Temperature 41°F - 95°F (5°C - 35°C)
Country of Origin Made in Korea
Dimension
20.8” x 15.3” x 5.1”
(Elongated)
Net Weight (Gross Weight) 8.3lb (13.2lb)
Specicaons
Installaon Notes
• For use with potable water only.
Do not use with recycled water.
• This product may not t certain
bowl designs.
• For use on a nominal 120V circuit
and GFCI receptacle. Do not use
with an ungrounded outlet.
• Power cord is located on the
right side of the seat and is 5 in
length.
Recommended
Power Outlet
Locaon
12” from
nished
oor