User Manual

2
RUN
TEMPERATURE
BATTERY PROTECTION
HIGH
MID
LOW
SET
COMPRESSOR SPEED
MAX
MIN
SET
ON
OFF
TEMPERATURE CONTROLLER
The Temperature Controller provides the ability to set the desired temperature level and displays
information on the cabinet and set temperature.
INSIDE
ZONE
6
RUN
TEMPERATURE
BATTERY PROTECTION
HIGH
MID
LOW
SET
COMPRESSOR SPEED
MAX
MIN
SET
ON
OFF
POWERING ON
Connect to the desired input voltage and press the button to turn the unit on, the display will
show the current internal cabinet temperature.
ON
OFF
The device is equipped with a multi-level battery monitor that protects your vehicle battery against
excessive discharging when the appliance is connected to 12/24 V supply.
If the appliance is operated when the vehicle ignition switched off, the appliance switches off
automatically as soon as the supply voltage falls below a set level.
The appliance will switch back on once the battery has been recharged to the cut in voltage level.
Push, hold and release button until the desired setting is reached.
SET
Battery
Protection
Mode Input Power: 12V Input Power :24V
LOW
When 9.6V, it’s off: when
10.9V, it’s on.
When 21.3V, it’s off: When
22.7V, it’s on.
MID
When 10.1V, it’s off: when
11.4V, it’s on
When 22.3V, it’s off: When
23.7V, it’s on.
HIGH
When 11.1V, it’s off: when
12.4V, it’s on.
When 24.3V, it’s off: When
25.7V, it’s on.
BATTERY MONITOR
OPERATION OF VL45