User Manual

DESCRIPTION
1 Lid Handle
2 Control Panel
3 Carry Handle
4 Power Input Panel
5 12V/24V DC Power Cable
6 110-120V(100-240V) AC Power Cable
Single Zone
(VL45)
Flexi Zone
(VL60)
1
1
3
2
4
5 6
3
GETTING STARTED
Installation
Please check whether the parts of Fridge/Freezer are complete after unpacking.
Note:
Place the unit in a dry place which is protected against splashing water. Do not place directly adjacent to
sources of heat (heating, gas ovens, hot water, pipes or under the blazing sun).
The normal operation of the appliance requires heat to be radiated away from the condenser located at the
end of the cabinet. Adequate airflow is required around the compressor at all times. (Fig. 1).
The cooling system has been designed to operate correctly when the appliance is positioned on angles up
to 30 degrees. It is recommended that the time the of unit is exposed to angles over 30 degrees is limited
to a maximum of four (4) hours continuous operation. (Fig. 2).
Application and Operative Cooling Range
The cooling compartment has varying temperature zones. The values indicated on the digital display are
related to the middle of the cabinet. The Single Zone Fridge/Freezer is designed to either refrigerate or
freeze food. The Flexi Zone Fridge/Freezer can be used as either a fridge or a freezer or both