User Manual

MAINTENANCE

the power cable out

Before carrying out any maintenance operation on the refrigerator,take

of its socket.

SUGGESTIONS

Should the device fail to work or work badly, before referring to our after-sales service, make sure that:

a) the feeding voltage is not missing;

b) the voltage is the same as the one shown on the plate;

c) the connections and the polarities are right;

d) the airing grids are not covered over;

e) the refrigerator unit is not near any heat source;

f ) the fuse of the feeding line is not blown.

CLEANING

●

Regularly clean the inside and outside of the refrigerator using only warm water and a neutral detergent.

●

Subsequent to washing, rinse with clean water and dry thoroughly using a soft cloth.

●

Do not use the following: special glass and mirror cleaning products, liquid, powder, or spray detergents,

alcohol, ammonia or abrasive products.

●

If you are not using the refrigerator, we suggest cleaning it well inside and leaving the door ajar

tven ilate the interior.to

Failure to obey the following warnings could result in death or serious injury:

●

ELECTRICAL SHOCK HAZARD. Do not immerse the product in water, or use it in an area that is

excessively muddy.

●

Do not use the cooler for an

y purpose other than as a mobile cooling device.

FALL HAZARD. Do not stand on the cooler. Doing so could damage the unit or cause minor

to moderate injury.

GENERAL SAFETY MESSAGES