User Manual

7
When your appliance is first connected to AC or DC input the digital read out will show the current
cabinet temperature, to adjust the temperature follow these steps:
To increase the cabinet temperature press
and to decrease press until the desired level is
reached.
Once selected the display will flash a number of times before returning to the current temperature.
ECO/MAX FUNCTION
To operate press the button to commence the “economy” operation mode, the ECO indicator
will illuminate.
Press the button again to select the MAX operating mode. The MAX indicator red light will
illuminate.
SET
SET
ENERGY SAVING TIPS
Choose a well ventilated installation location which is protected from direct sunlight and allows air
to circulate around the cabinet.
Allow hot food to cool down first before you place it into the cabinet.
Do not open or leave the lid open more often than necessary.
If ice forms on the internal walls or lid defrost the appliance.
Select the desired cabinet temperature in relation to the intended use, avoid setting unnecessarily
low temperatures.
This fuction allows the compressor speed to be slowed down to increase operating efficiencies
(ECO) or increase the compressor speed to provide “quick” cool down times (MAX).
The electronic controller has been programmed to maintain an average of the set temperature. The
compressor will start up when the internal cabinet temperature increases 0.5 to 1.5 degrees above
that selected and will run until the temperature is 0.5 to 1.5 degrees below the set temperature.
TEMPERATURE CONVERSION OF VL45 SERIES
When the appliance is on, press the    and    buttons at the same time to switch back and
forth between Celsius and Fahrenheit.
SET