TR45 / TR60 FRIDGE USER MANUAL Please read and understand this manual completely before using this product
SAFETY INFORMATION: Please read this operating manual carefully before starting the appliance. Keep it in a safe place for future reference. If the appliance is passed on to another person, this instruction manual must be handed over to the user along with it. The manufacturer cannot be held liable for damage resulting from improper usage or incorrect operation.
DATA SHEET TR45 TR60 66.4x41.4x44.4 cm 24.1x16.3x17.5 inch 66.4x41.4x53.4 cm 24.1x16.3x21.0 inch 18.0Kg 39.7 lbs 19.8Kg 43.
INSTALLATION METHOD OF HANDLE STRAPS AND WHEELS TR45 & TR60 refrigerators are equipped with hand straps and pulleys to facilitate your travel. 1、Installation of handle belt assembly: install handle fixing buckle ① on both sides of refrigerator with screws. 2、Use the handle belt ② to pass through the handle fixing buckle holes on both sides, and adjust the appropriate length. 3、Wheel assembly installation: install wheel ③ to the side of refrigerator with screws.
INSTALLATION BEFORE INITIAL USE ● Place the refrigerator on a dry, sheltered, flat surface and away from any edges. The refrigerator must not be used unsheltered, in the open air or exposed to splashing or rain. ● Your refrigerator requires good ventilation, especially around the back of the refrigerator, allow a gap of at least 15 cm around the sides, back and top. Never use your refrigerator in the boot of a car or against. ● Do not install the refrigerator near heat sources, sunlight.
ADJUSTING THE TEMPERATURE: 1. Turn the fridge on by connecting to power and pressing the ‘ ’button. 2. The display will show the fridge’s current internal temperature. The fridge will start cooling to the last set temperature. 3. To adjust the set temperature, press the ‘ ’or the ‘ ’arrow buttons until the desired set temperature is displayed. Additionally, the set temperature can be adjusted in 4°C increments (per second) by holding either ‘ ’or ‘ ’down.
ADJUSTING THE LOW VOLTAGE CUT-OFF: ICECO Fridge come with three different settings for voltage cut-offs: BATTERY START PROTECTION: 1. The fridges comes withs a 5-second start-up delay for the fan and a 20-second start-up delay for the compressor. This is used to not overload the battery of the vehicle when it is frist starting. 2. During the 20-second delay,the user can still adjust settings. TROUBLESHOOTING: Code Description Action E1 Battery Voltage is low.
ICECO product comes with a 5-year warranty on the compressor and 1 year warranty on all other parts for your peace of mind. In the unlikely event this product fails when used according to our user guide, we will either repair or replace it. For full warranty terms and conditions on this product, please see the user guide. Customer Support For any technical or warranty enquires please visit our customer service portal at: www.icecofreezer.
