Data Sheet

3
The Fridge/Freezer is designed to operate on DC voltage inputs.
DC input 12V or 24V
DC cable
2.5m,16AWG
INSTALLATION
BEFORE INITIAL USE
● Place the refrigerator on a dry, sheltered, flat surface and away from any edges. The refrigerator must
not be used unsheltered, in the open air or exposed to splashing or rain.
● Your refrigerator requires good ventilation, especially around the back of the refrigerator, allow a gap of
at least 15 cm around the sides, back and top. Never use your refrigerator in the boot of a car or against.
● Do not install the refrigerator near heat sources, sunlight.
● Should you need to leave the device under the sun for long periods, eg. in a car or in other vehicles,
make sure you protect it, prevent the cover plastic materials from getting damaged or warped.
● To fix it inside the car and to avoid damages during transport, we suggest to secure the fridge trough
metal brackets placed on the sides.
USING THE REFRIGERATOR IN A VEHICLE
● Connect the feeding cable to a direct current 12 or 24 V DC power source.
● Make sure the polarity is right.
● The supply line is protected by a 15 A fuse located on the box.
● If connected to an existing cigarette plug, carefully check up that power supply is sufficient.
● If the supplied power cable is not used, please see the table containing the information related to the
cable section:
Read the "CONTROL PANEL USE" section to learn how to modify the battery protection level.
DANGER:Risk of child entrapment.Before you throw away your
refirgerator or freezer