on . GETTING STARTED. . SINGLE ZONE OPERATION OF VLF Series . MAINTENANCE... 8. 9. 4.1 Installation 4.2 Application and Operative Cooling Range... 4.3 Power Requirements. 5.1 Battery mess en san sss tines 5 5.2 Powering On. 5.3 Temperature Controller 5.4 ECO/MAX Function... 5.5 Energy Saving Tips. . FLEX ZONE OPERATION OF VLF Series 7 6.1 Power-Off and on... 6.2 Eco Function-Setting 6.3 Battery 6.4 Cabinet 6.5 Shutting Down a Selected Zon CLEANING. SUGGESTIONS. 10. GENERAL SAFETY enter 9 1". NOTICE.
Please read this operating manual carefully before starting the appliance. Keep It In a safe place for future reference. If the appliance Is passed on to another person, this Instruction manual must be handed over to the user along with it. The manufacturer cannot be held liable for damage resulting from improper usage or incorrect operation.
MODEL VLF Series MODEL VLF Series 691x374x447mm 790x465x4765mm Ibs) SCOPE BD35F SCOPE BEDSORE 85wW DC 12V/24V , AC 110-120 V ( for US) JAC 100-240V { for AU & EY -18Cto+10QO To 50 TF) R134a-CFC Free C-repentant Metal cabinet Naming Method: For example: VL45#*S 45 with mean capacity; with mean different Appearance Color B{black); G{gray); W(whits); with mean Single Zone or Dual Zone design; 8 =S with mean app; N with mean no app.
Installation Please check whether the parts of Fridge/Freezer are completes after unpacking. Note: Place the unit in a dry place which is protected against splashing water. Do not place directly adjacent to sources of heat (heating, gas ovens, hot water, pipes or under the blazing sun). The normal operation of the appliance requires heat to be radiated away from the condenser located at the end of the cabinet. Adequate airflow is required around the compressor at all times. (Fig. 1).
Operating your Fridge/Freezer with 12/24V DC « Plug the 12V/24V DC power cable Into the DC POWER socket (as circled) on the end of the Fridge! Freezer and then connect to the vehicle cigarette lighter socket or suitable 12V or 24V DC power source. » The Fridge/Freezer will automatically tum on, thees is no requirement to switch the appliance on. « The display will automatically show the current internal cabinet temperature.
CAUTION: Do not touch cables, plugs or switches with wet hands or when your feet are in contact with water! If you operate your Fridge/Freezer on board a boat by means of a shore connection to a AC power source, the power connection must Include an earth leakage RCD residual current device. AC Power Cable DC Power Cable BATTERY MONITOR The device Is equipped with a multi-level battery monitor that protects your vehicle battery against excessive discharging when the appliance Is connected to 12/24 V supply.
TEMPERATURE CONTROLLER The Temperature Controller provides the ability to set the desired temperature level and displays information on the cabinet and set temperature. Ice co (Embezzle) (Eee ‘When your appliance Is first connected Input the digital read out will show the current cabinet temperatures, to adjust the temperature follow these steps: To increase the cabinet temperature press @ and to decrease press ® until the desired level is reached.
€D Right Zone Temperature Display © attribution © pow Buries Q) Power Fervor Button © Mode Button © voltage Display €) Mods Display Button Loft Zone Temperature Display ©) Battery Monitor Display Power Off and On 1. Press and hold the power button @ for 2 to seconds and the unit will power up and display the current cabinet temperature. 2. Press and hold the power button ©) for 2 to seconds and the unt will power off. ECO/MAX Function 1.
TEMPERATURE CONVERSION OF VLF SERIES In the standby mods press and hold the “Mode” button for 38S to enter the advanced menu settings. After anteing the menu, short press the “Mode” button to cycle Intel F1/F2/F3 (temperature compensation modal, F/C (Celsius Fahrenheit switch madam. After snaring the FC function, then press enter Celsius Fahrenheit, F for Fahrenheit and C for Colossus. Cabinet Temperature Setting ‘The temperature may be set Independently for each zones In the range -18° to +10°C.
Before carrying out any maintenance operation on the refrigerator, take the power cable out foist socket. «Regularity clean the Inside and outside of the refrigerator using only warm water and a neutral detergent « Subsequent to washing, rinse with clean water and dry thoroughly using a soft cloth. #Do not use the following: special glass and minor cleaning products, liquid, powder, or spray detergents, alcohol, ammonia or abrasive products.
Failure to obey the following notices could result in property damage: Keep sand or dirt away from the cooling system ventilation area. Do not leave the cooler on the deck of a boat for an extended period. Salt water damage to the cooling system, electronics, or metal hardware could occur. Do not expose the cooler to extreme heat. Only use mild soap and water fo clean the cooler. Do not use a DC extension cord. Do not use a power strip or two-way splutter.
