Safety Data Sheets (SDS)

Ice Slicer® Granular Ice Melt
1/30/2015
Page 3 of 5 - Ice Slicer® is a registered trademark of Redmond, Incorporated.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines:
Sodium Chloride
None Established
Magnesium Chloride
None Established
Potassium Chloride
None Established
Calcium Chloride
None Established
Engineering Controls: Use with adequate general ventilation to minimize exposures.
Respiratory Protection: In operations where exposure levels are excessive, a NIOSH approved respirator with
dust cartridges or supplied air respirator appropriate for the form and concentration of the contaminants
should be used. Selection and use of respiratory equipment must be in accordance with OSHA 1910.134 and
good industrial hygiene practice.
Skin Protection: Wear impervious gloves such as rubber or neoprene if needed to avoid prolonged skin
contact.
Eye Protection: Safety glasses recommended.
Other: Long-sleeved clothing and long pants recommended to avoid prolonged skin contact. Suitable washing
facilities should be available in the work area.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance And Odor: Reddish to white solid with no odor.
Physical State: Solid
Odor Threshold: Not established
Vapor Density: Not determined
Initial Boiling Point/Range: Not established
Solubility In Water: 92-99%
Vapor Pressure: Not determined
Relative Density: Not determined
Evaporation Rate: Not determined
Melting/Freezing Point: Not determined
pH: Not applicable
VOC Content: Not determined
Octanol/Water Coefficient: Not determined
Solubility (other): Not determined
Decomposition Temperature: Not determined
Viscosity: Not applicable
Flammability (solid, gas): Not flammable
Flashpoint: Not applicable
Autoignition Temperature: Not determined
Flammable Limits: LEL: Not determined
UEL: Not determined
10. STABILITY AND REACTIVITY
Reactivity: Not normally reactive
Chemical Stability: Stable under normal storage and handling conditions.
Possibility of Hazardous Reactions: None known.
Conditions to Avoid: None known.
Incompatible Materials: Strong oxidizing agents, concentrated acids, and some metals.
Hazardous Decomposition Products: When heated to decomposition emits hydrogen chloride, halogenated
compounds, and chlorine gas.